The world of building your own 1911 has never been easier. Thanks to the Stealth Arms Phantom 1911 Jig, finishing your 1911 80% frame has become something you can do with a few tools and NO MILLING MACHINE. The 1911 Phantom Jig is the fastest, most durable 1911 jig on the market today.
Comprised of 3 main pieces; 2 long side plates and 1 cutting “car”. The Phantom Jig is the only 1911 jig that utilizes carbide cutters to perform the necessary removal of material from the frame.
One of the carbide cutters is used to cut out the slide rails and the other to cut the barrel seat in the frame. The 2 longer side plates act as a perfectly flat plane surface for the cutting “car” to do its work. Once the 1911 frame is inserted between the two long side plates, the cutting car is set on top of the side plate with the carbide cutter facing down towards the soon-to-be 1911 slide rail (see picture below for visual).
By working the cutting car back-and-forth in the slide rail cutout on the side plate, the carbide cutter protruding out of cutting car is shaving layers of your slide rail. In short, you basically have to do this over-and-over again until the appropriate slide rail depth is achieved.
BENEFITS OF THE 1911 PHANTOM JIG:
The fastest way to complete a 1911 frame
No milling machine required
No need for additional parts
Drill bits are included
Carbide cutters included
Instructions included Online video tutorials available on YouTube
Works on ALL Stealth Arms 1911 frames
Made in the USA (Ohio)
****The Phantom Jig produces mixed results when used on steel frames. Multiple cutters are usually needed to finish steel frames.***